Journal of International Society of Preventive and Community Dentistry

ORIGINAL ARTICLE
Year
: 2019  |  Volume : 9  |  Issue : 2  |  Page : 152--158

Comparative evaluation of the effect of chemical disinfectants and ultraviolet disinfection on dimensional stability of the polyvinyl siloxane impressions


Sharayu Vinod Nimonkar1, Vikram M Belkhode1, SR Godbole1, Pranali Vinod Nimonkar2, Trupti Dahane1, Seema Sathe1 
1 Department of Prosthodontics, Sharad Pawar Dental College and Hospital, Sawangi, Wardha, Maharashtra, India
2 Trauma Care Centre, Government Dental College and Hospital, Nagpur, Maharashtra, India

Correspondence Address:
Dr. Sharayu Vinod Nimonkar
M W Belkhode, New SBI Colony, Nisarg Nagri, Nagpur Road, Wardha - 442 001, Maharashtra
India

Context: Infection control is an important concept in the present day practice of dentistry. Disinfection of dental impressions is part of the daily routine in a dental clinics. After disinfection, it is important that impressions remain dimensionally stable. Aim: The purpose of this study was to compare the effect of chemical disinfectants and ultraviolet (UV) disinfection on the dimensional stability of the polyvinyl siloxane impressions. Objectives: The objective of the study is (1) To evaluate the effect of chemical disinfectant (2% glutaraldehyde and 1% sodium hypochlorite) and UV disinfectant on the dimensional stability of polyvinyl siloxane impression material. (2) Comparative evaluation of the dimensional discrepancy between the cast poured from the polyvinyl impressions material, that is subjected to chemical disinfectant and UV disinfectant to that of cast poured from impressions that were nondisinfected. Materials and Methods: A customized tray was fabricated to make impressions. Impressions were divided into four groups, 10 samples were disinfected with 2% glutaraldehyde for 20 min, 10 samples were disinfected with 1% sodium hypochlorite for 20 min, 10 samples were disinfected with UV light for 20 min, and 10 samples were not subjected to disinfection which served as control group. All the samples were poured after 30 min in die stone. Measurements were recorded using traveling microscope of 0.001 accuracy. Statistical analysis used in this study was the one-way ANOVA test. Results: The result showed significant dimensional changes in samples disinfected with 2% glutaraldehyde and 1% sodium hypochlorite, whereas samples disinfected with UV disinfectant unit showed no significant dimensional changes when compared with control group samples. Within the chemical groups, impressions disinfected with 1% sodium hypochlorite showed more discrepancy in the dimensions when compared to the 2% glutaraldehyde disinfected group. Conclusions: UV light disinfectant can be safely used to disinfect impressions as compared to chemical disinfectants in clinical prosthodontic procedures.


How to cite this article:
Nimonkar SV, Belkhode VM, Godbole S R, Nimonkar PV, Dahane T, Sathe S. Comparative evaluation of the effect of chemical disinfectants and ultraviolet disinfection on dimensional stability of the polyvinyl siloxane impressions.J Int Soc Prevent Communit Dent 2019;9:152-158


How to cite this URL:
Nimonkar SV, Belkhode VM, Godbole S R, Nimonkar PV, Dahane T, Sathe S. Comparative evaluation of the effect of chemical disinfectants and ultraviolet disinfection on dimensional stability of the polyvinyl siloxane impressions. J Int Soc Prevent Communit Dent [serial online] 2019 [cited 2020 Mar 29 ];9:152-158
Available from: http://www.jispcd.org/article.asp?issn=2231-0762;year=2019;volume=9;issue=2;spage=152;epage=158;aulast=Nimonkar;type=0