| Abstract|| |
Background: Dental implants are considered the best treatment option for replacement of missing teeth due to high survival rates and diverse applications. However, not all dental implant therapies are successful and some fail due to various biological and or/mechanical factors. The objective of this study was to systematically review primary studies that focus on the biomechanical properties of dental implants in order to determine which biomechanical properties are most important for success of dental implant therapy. Materials and Methods: An electronic database search was performed using MEDLINE (PubMed), EMBASE, Google Scholar, and CAB Abstracts. Six principal biomechanical properties were considered to prepare the search strategy for each database using key words and Boolean operators. Human and animal studies (observational studies, trials, and in vitro studies) were included in this review. Human studies that were considered eligible needed to have subjects above 18 years who received permanent restorations after implant surgery and followed up for at least 6 months after receiving permanent restorations. Studies with subjects who had absolute contraindications at the time of dental implant surgery were excluded. Results: In total, 28 studies were included in the review after application of the eligibility criteria; 18 in vitro studies, 5 cohort clinical studies, 3 animal studies, and 2 nonrandomized trials. Six in vitro studies assessed loss of preload, five in vitro studies assessed fatigue strength, four assessed implant abutment connection design, and one assessed implant diameter. Two nonrandomized trials assessed torque and six observational studies assessed the effect of cantilevers. Gold alloy coating of abutment screws resulted in higher preload values followed by titanium alloy coating and gold coating; there was a difference in preload values between coated and uncoated screws when tightened repeatedly. Preload values decreased as a function of time with majority of preload loss occurred within 10s of tightening. The 8-degree internal conical implant performed better than the internal hex design. Higher rate of complications (porcelain chipping, de-cementation) was observed in the cantilever groups in studies. Conclusion: Biomechanical properties of implants like preload, torque, cantilever design, implant abutment design have profound effects on the survival rates of dental implants. With limiations, this review provides some important parameters to consider for successful implant therapy.
Keywords: Biomechanics, cantilever, implant, preload, screw
|How to cite this article:|
Alzahrani KM. Implant bio-mechanics for successful implant therapy: A systematic review. J Int Soc Prevent Communit Dent 2020;10:700-14
|How to cite this URL:|
Alzahrani KM. Implant bio-mechanics for successful implant therapy: A systematic review. J Int Soc Prevent Communit Dent [serial online] 2020 [cited 2021 Mar 8];10:700-14. Available from: https://www.jispcd.org/text.asp?2020/10/6/700/300929
| Introduction|| |
The use of dental implants is considered as the best treatment option for treating partial or complete edentulism and replacing single missing tooth in the anterior and posterior regions of the mouth. High survival rates for dental implant supporting single crowns or fixed partial prothesis have been reported; however, systematic reviews of the literature have also identified a variety of the complications associated with dental implants and prothesis superstructures., These complications are broadly classified into biologic, technical, and esthetic. Biological complications affect the tissue supporting the dental implant while the mechanical complications affect the structural integrity of the implant and/or abutment of prosthetic superstructure. One of the most commonly reported biological complication is peri-implantitis and peri-mucositis. Common technical complications include veneering material or framework, loss of retention, and screw loosening.
Despite the fact that majority of these complications does not threaten the survival of dental implants, management can be time consuming and requires additional financial resources for the patient and the clinician and may even affect the patient’s quality of life. To avoid or minimize the chance of occurrence of these complications, it is important to avoid known risk factors during the initial planning of the implant therapy. The common approach of systematic reviews with a focus on risk factors associated with implant and implant-supported prosthetic compactions is the comparison of failure/complication rates to be expected with various types of implant characteristics and/or reconstructions., There are, however, many variables that the clinician should consider such as implant connection system, torque applied, and abutment screw material that can be influenced in terms of the biomechanical yield of the implant prosthesis.
This study will sytematically review primary research studies that have tested the bio-mechanical properties of dental implants. The aim was to address the role of bio- mechanical factors and which biomechanical factors are most advantageous for successful implant therapy in the restoration of missing teeth. The main outcome of this review is to determine what bio-mechanical factors are most critical for implant success.
| Materials and Methods|| |
This systematic review is reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guideline. An electronic database search was performed for journal articles published in English, form database inception to December 2019, on MEDLINE (PubMed), Google Scholar, EMBASE, CAB Abstracts. A separate search strategy was prepared for each database using key words and Boolean operators. For the preparation of the search strategy, seven principal biomechanical factors were considered. Systematic reviews, editor letters, reviews, abstracts, short communications, books, and dissertations were not considered eligible. The type of studies considered eligible was: (1) Observational studies—prospective and retrospective. (2) Intervention studies (trials)—on humans and animals. (3) In vitro studies. These studies are a mix of laboratory experiments conducted on models, observational and intervention studies on animals, and partially or completely edentulous patients. Where human studies are being reviewed, the following eligibility criteria were followed.
- Completely or partially edentulous patients above 18 years of age
- Patients who received permanent restorations after implant surgery
- Patients who had been followed upfor at least 6 months after receiving permanent restoration
- Patients who had any absolute contraindication to dental implants at the time of implant surgery
Two independent reviewers screened titles and abstracts. After considering inclusion and exclusion criteria, full-text articles were selected. Studies were eliminated based on the eligibility criteria of study design and participants. After reading complete texts, studies were evaluated against eligibility criteria again and data were extracted from the final selected studies. Divergences between two reviewers were solved through discussion or through consensus with the intervention of third reviewer. The following data were extracted from the selected studies: authors, year of publication, study design, implant characteristics, prothesis characteristics, cantilevers extension and location, opposing dentition, type of abutment, screw type and material, main outcome measures, and values. After data extraction, considering the heterogeneity in terms of outcomes and measures proceeding with a meta-analysis was not considered appropriate. The results are presented using descriptive synthesis in the form of tables and text.
Tools to assess the quality and risk of bias for in vitro studies could not be identified; so, this assessment was performed only for nonrandomized intervention studies in humans and animal models. The risk of bias of the included experimental in vivo studies was assessed using SYRCLE’s risk of bias tool. Six types of bias (selection, performance, detection, attrition, reporting, and other biases). The score “yes” indicates a low risk of bias, “no” indicates a high risk of bias, and “?” indicates an unclear risk of bias. Following authors’ recommendations, we have not calculated a summary score for each individual study; however, a simple counting of all the domains that scored high for the risk of bias is provided. We initially planned to use the Cochrane Collaboration’s risk of bias assessment ROBII tool to assess risk of bias for randomized studies. However, none of the included studies fell into this category. The studies involving humans were observational studies; so, for quality assessments, Newcastle–Ottawa Scale (NOS) scale was used instead). Assessment was performed independently by two reviewers, and eventual disagreements were solved through discussion or though consultation with a third author.
| Results|| |
Study selection and description
Of the 234 titles resulting from the online search, 59 studies were selected for full-text review after abstract screening. In total, 28 full-text articles were included in the review for data extraction and analysis, 18 in vitro studies, 5 cohort clinical studies, 3 animal studies, and 2 nonrandomized studies of interventions. The results of the methodological quality and risk of bias for observational and animal studies are presented in [Supplementary Table 1][Additional file 1] and [Supplementary Table 2][Additional file 2], respectively. [Figure 1] displays details of the selection process used to identify the included publications.
|Figure 1: PRISMA flow diagram of literature search and selection process. PRISMA, Preferred Reporting Items for Systematic Reviews and Meta-Analyses|
Click here to view
Six different outcomes were considered: loss of preload, fatigue/mode of failure, stress distribution, removal torque values, optimal torque generation, and biological/technical complications. On the basis of the outcome, six in vitro studies assessed the influence the loss of preload for screw abutment (four studies) and prosthetic screw (two studies) [Table 1]. The variable considered for the abutment screw was screw surface modification and dry lubrication while for the prosthetic screw the variable was loss of preload with time after clinical use or several hours after tightening of a new screw. In the majority of cases, the screws were exposed to a sequence of tightening and loosening, before measure performance. The laboratory specimens were not subject to loading test, only in one case the measures were performed in screws that have been subject to clinical masticatory functional load. Six in vitro studies considered the factors that might influence the reduction in removable torque after mechanical and technical stress application [Table 2]. Five in vitro studies were included that considered the influence of different factors on fatigue strength. Four studies assessed the influence of implant abutment connection design and one the implant diameter on fatigue and mode of failure under different loading conditions. Either static or cyclic loading was applied, consisting of different force values and the number of cycles [Table 3]. Two nonrandomized studies assessed the variability of optimal torque delivered based on the torqueing method [Table 4]. Six observational studies assessed the effect of cantilever presence and characteristics, loading conditions, and prothesis misfit on technical and biological complications [Table 5].
|Table 1: Summary of Data Extracted from Included In vitro Studies and variables that influence preload values|
Click here to view
|Table 2: Summary of Data Extracted from Included In vitro Studies and variables that influence torque values|
Click here to view
|Table 3: Summary of Data Extracted from Included In vitro Studies and variables that influence fatigue and mode of failure of IAC|
Click here to view
|Table 4: Summary of Data Extracted from Included Non-randomized Studies of Interventions and variables that influence generated torque values|
Click here to view
|Table 5: Summary of Data Extracted from Included Non-randomized Studies of Interventions and the variables that influence implants clinical complications|
Click here to view
The included studies were grouped according to six specific biomechanical factors:
- Abutment screw material/surface modification
- Prosthetic screw loss of preload
- Implant/abutment joint design
- Torque method
- Prothesis misfit
Abutment screw material/surface modification
One in vitro study by Byrne et al. determined that gold coating of the abutment screw produced higher preload values for a given torque application. Compared to uncoated analogue, the gold-coated screw resulted in twice the preload at 35N cm torque [Table 1]. The testing consisted of applying increasing torque values 10, 20, and 35N cm on each abutment-screw assembly. The preload values were measured after application of each of the above-described torque values, after which screws were loosened completely. This procedure of screw tightening and loosing was repeated for three consecutive times. There was a difference between coated and uncoated screws when the screws were tightened repeatedly. The gold-coated screw loss preload on the second and third tightening episodes, the gold alloy screw lost preload after the second tightening with values remaining constant thereafter while the titanium alloy screw remained unchanged for the three tightening episodes. Another variable considered in this in vitro study was the abutment type. Two types of abutments were considered the prefabricated abutment and the cast-on abutments, consisting of a machined gold alloy cylinder to ﬁt the implant hex and a castable plastic sleeve. The type of abutment used during testing influenced the preload values regardless of the screw type with the latter consistently was associated with higher preloads values. The preload generated by three different type of screws, gold alloy, titanium alloy, and gold-coated after appliaction of the same torque force were compared in another in vitro study. The difference in preload values was significant between the three groups and the gold alloy screw presented higher preload values followed by the gold-coated and the titanium alloy screw. Moreover, statistically significant difference in the preload values was found for the gold and titanium alloy screws when these were torqued the values recommended by the manufacturer. However, at maximum torque, titanium screw-induced stress was below the titanium yield strength, meaning that even with higher torque values the screw might still function within the material’s elastic range. Surface-treated titanium, and gold alloy, and non-treated titanium and gold alloy screws were compared in another study. Surface-enhanced screws, in particular gold-coated alloy screw, generated greater preload values when compared to conventional titanium and gold alloy screws.
Prosthetic screw loss of preload
Prosthetic screws were analyzed in two studies. After application of a defined torque, under standard, nonloading conditions a loss of preload was observed over time. The majority of preload loss occurred within 10s of tightening. In another study, when screws have been in use for 18–120 months, the preload values decrease as a function of time during which the screw has been in use [Table 1]. Other factors might, however, influence the preload values, such as troquing sequence, screw design abutment design, implant-abutment connection system. Considering the greatest loss of preload occurs during the initial period after torque application, torqueing and retorquing can affect preload loss recovery., Screw presents generally with a flat head, a long stem, and a variable number of threads. It has been observed that wider screws with a long stem provide less torque loss while there is controversy about the influence of the shape of the screw head on the loss of preload. Despite abutment design has not been considered a crucial factor in the maintenance of the preload values, features such as abutment collar length has been found to influence the preload loss. With regard to the type of connection, most authors have found that internal hexagon type exhibits greater preload than external hexagonal type.
Implant/abutment joint design
A comparison between 8- and 11-degree internal cone reveled that the 11-degree internal cone deformed before the cone joint, preventing screw fracture while the 8-degree cone fractured at the head of the screw. Another study compared two commercial implant systems to address the effect of joint design on fracture strength under cyclic loading conditions with a force applied perpendicular to the long axis of the implant system assembly. The 8-degree internal conical implant/abutment interface performed better than the hex-mediated butt joint. Six different implant systems with internal and external connection assessed for fracture strength after cyclic loading. Long internal connection and cam slott connection compared to short wither external or internal connections showed increased resistance to fracture strength., Cibirka et al. examined the effect of three different implant/abutment joint configurations differing based on the vertical height of degree of fit tolerance of the implant abutment interface and found that after cyclic loading, no difference in the de-torquing values existed between the three groups. Platform switching was compared to external hex connection to assess the effect on stress distribution using three finite element analysis. In the platform switching model, the stress level in the cervical bone area at the implant was greatly reduced however, increasing stress in the abutment or abutment screw, compared to the normal regular sized one. The conical implant–abutment interface was compared to the flat top interface to asses if the interface design affects the stress pattern at the level of marginal bone. The conical implant–abutment interface type decreased in the peak bone–implant interfacial shear stress compared to the flat top interface of the type studied.
Two observational studies assessed the interindividual and method imploded on the variability on the torqueing force [Table 4]. When participants were asked to tighten a screw abutment with the maximum of force using a handheld screwdriver, varying degrees of torqueing abilities were displayed. Considering the necessity to obtain an optimal and predictable final torque for screw abutments, it is important to monitor and calibrate the amount of force delivered. In addition, a variation between delivered torque and target torque was observed when using a handheld screwdriver and different mechanical devices. In order to obtain proper torqueing, calibrated torqueing devices should be employed.
Three observational studies examined the effect of cantilever on the implant and prothesis outcome [Table 5]. All studies included were retrospective cohorts involving 105 patients. Two studies examined the effects of posterior cantilever, both mesial and distal, of partial fixed and single implant supported prothesis in the upper and lower arch. The mean duration of the observation period was 5.3 and 3. 9 in the first and second study, respectively. The first study included a control group and compared the effect of cantilever presence on different outcomes. When comparisons were made for maxilla and mandible separately, no difference in the marginal bone loss (MBL) levels was found between the cantilever and control groups. A higher rate of minor technical complications was observed in the cantilever group, comprising porcelain chipping and prothesis de-cementation. Another retrospective cohort study examined the factors that could possibly influence the outcome of the presence of cantilever in implant-supported screw-fixed partial prothesis. The prothesis was either screw retained or cemented and the mean length of the cantilever was 5.77 mm (5.33 mm for the mesial and 6.77 mm for the distal cantilever). The mean cantilever length in nonsuccessful cases was 6.25 mm (range 2.8 mm). The primary outcome for this was MBL. A linear relationship between the cantilever length and MBL for the cantilever nearest fixture was observed. Medium MBL (MBL) of distal cantilever prothesis was higher than that of mesial cantilever prothesis although the difference was not statistically significant. Mesial cantilever prosthetic reported a higher rate of prosthetic failure. No differences were observed on MBLs when the two opposite dentitions were considered; natural teeth or ﬁxed prostheses on natural teeth vs opposite teeth with implant-supported ﬁxed prostheses.
One retrospective cohort study assessed the influence of anterior cantilever on technical complications of full arch crew retained implant supported mandibular prothesis supported by five implants placed in the intraforaminal region. Mean anterior cantilever length was 8.78 mm (range 5.5 to 14.4 mm), mean posterior cantilever length was 16.2 mm, and mean anteroposterior spread was 7.9 mm (range 5.2 to 12.3 mm). No significant correlation was observed between the length of mandibular anterior cantilever and screw loosening; however, the ratio of posterior cantilever to anteroposterior spread was signiﬁcantly associated with screw loosening.
The effect of implant axial inclination on clinical outcomes was assessed in two observational clinical studies., [Table 5]. The follow-up on both clinical studies was 5 years. In one study, MBLs on axially and nonaxially positioned implants, supporting fixed partial prothesis were considered. The implant inclination in the mesiodistal direction was moderate, and mean inclination 17.11° (range 11–30°) does not influence the implant bone level loss under functional loading conditions. The other cohort study considered either fixed partial or full arch prothesis with implants tilted for 25–35°. There was no influence of the implant inclination on the cumulative survival rate after 5 years of functional loading of the prothesis.
The effects of axial and nonaxial loading conditions on bone remodeling around implants was assessed in two animal models. In a dog study, axial and nonaxial loading conditions were induced by a bilaterally supported ﬁxed partial dentures or a cantilever-fixed prothesis supported by two implants. However, more dynamic bone remodeling observed histologically on non-axial loading during a 7 weeks period. Nonaxial loading conditions were induced by the restoration with angulated abutments in another preclinical study. After 1 year of functional loading, no differences were observed between straight and angulated abutments on surrounding bone.
The effect of prothesis misfit was considered in two in vitro studies, one clinical study and one animal model.,,, Al-Turki et al. in an in vitro experiment evaluated the effect of prothesis misfit on screw stability. After vertical cyclic loading, significant prosthetic screw instability was observed compared with the control group. One cohort was a mixed retrospective/prospective study. One group was prospectively followed for 1 year while the second group has been wearing a prothesis for 4 years. All the protheses were implant-supported mandibular fixed full-arch prothesis. Different parameter of prothesis misfit was considered, and none of them seemed to influence marginal bone level. [Table 5]. Farina et al. evaluated the influence of tightening technique and prothesis misfit after cyclic loading on torque removal. The authors concluded that the misfit decreases the removal torque values and the application of tightening and retightening increases removal torque independent of the level of prothesis misfit [Table 2]. In an experimental animal study, vertical misfit of the superstructure had no influence on the process of osteointegration. In addition, to the level of misfit, the authors also evaluated the degree of preload on the contact area between the implant thread and the bone, thus influencing the process of osteointegration.
One in vitro study compared 4- and 5-mm diameter implants. Under both static and dynamic loading conditions, the 5-mm diameter implant was stronger as measured by fatigue failure.
The effect of screw length on screw loosening after thermocycling was assessed in one in vitro study. No statistically significant difference was found between the groups with different abutment screw length and removal torque values.
Different implant abutment specimens and different tightening torque values (24, 30, and 36N cm) were evaluated under cyclic loading conditions. Lee et al. concluded that insufficient torque will lead to poor fatigue performance of dental implant–abutment assemblies and that abutment screws should be tightened to the torque recommended by the manufacture.
| Discussion|| |
Torque application will result in the development of a force within the screw called preload. The screw is elongated during torque application with shank and threads being placed into tension. It is the elastic recovery of the screw that pull the abutment/prothesis system together creating a clamping force that keep the joint system form separating. As suggested by some authors, a linear relationship exist between the tightening torque and screw preload. Greater preload values will result in a greater force required to loosen the screw. The application of an adequate torque value is of crucial importance for clinical success. Of the included studies, only one evaluated the effect of different torque applications on screw stability as measured by the removal torque. The low tightened implant abutment assembly resulted in mechanical failure after cyclical loading. On the other hand, overtightening that exceed the yield strength of the screw may lead to loss of mechanical properties of the screw due to plastic deformation. The optimum torque value may depend on several considerations that were not covered in this review. However, it was reported in two of the included studies that large interindividual variability exists when the torque force is delivered though a handheld screwdriver and that this technique will result in consistently lower torque force compared to the target values., The screw material significatively affects the preload values. Independent of the magnitude of the tightening force applied, gold screws exhibited higher preload values when compared to either titanium screws or surface-treated titanium screws. When an additional group was added, surface-coated gold allows the latter exhibit higher preload values. The rationale behind modifying the screw surface by adding a solid lubricant is to decrease the coefficient of friction, thus increasing the preload value. Conflicting results were reported for repeated tightening episodes which is a common clinical situation. In one study, this resulted in a decay of the preload particularly evident for the gold-coated screw and in another study it was reported that when the same screw is fixed several times, its preload values increased. In some noncoated screws, repeated tightening removes small irregularities on surfaces, which in turn reduces the friction and increases overload. Generalizability of the results is not possible due to the small number of the included studies and the different measures of the outcome or variables that might influence the preload values such as application of different rates of torque force or torque that differed from optimal values as recommended by the manufacturer, opposing joint surfaces, abutment design, friction coefficient, and lubrication.
Six in vitro studies included in the present review assessed the effect of implant abutment design on force strength and mode of failure, screw loosening and instability, and the pattern of stress distribution. The systems were tested under thermic or mechanical stress (static or cyclic) conditions. There was a large variability between the included studies with regard to the interface design and characteristics precluded the possibility to make comparisons between studies. However, the type of connections that exhibited superior characteristics referred to the outcomes mentioned above were internal conical, long internal, and slot implant/abutment interface. With the platform switching model decreased the stress transfer at the level of marginal bone but more stress at the level of abutment or abutment screw. Implant-supported prothesis with cantilever extensions are often necessary to provide occlusal support or for esthetic reasons. Mandibular and maxillary posterior cantilevers are more often investigated in in vitro and clinical studies. In the present review, three observational studies that addressed posterior cantilever in partial fixed prothesis, anterior cantilever in full arch prosthesis, and the influence on implant success were included. Marginal bone loss (MBL) and implant success was not affected by the presence of the cantilever although this affected the rate of occurrence of minor technical complications. Factors such as cantilever length, type of cantilever (mesial vs distal), and type of opposite dentition (natural teeth or tooth supported prothesis vs implant supported prothesis) had no influence of MBLs although more prosthetic complications were reported for mesial compared to distal cantilevers. Regarding anterior cantilever, its overall length seems to have no technical complications such as screw loosening. Besides the presence or absence of a cantilever extension, other factors such as the number of implants supporting the cantilever, the type of prothesis, occlusal forces and occlusal scheme, opposing dentition, implant connection type, and implant to crown ration might influence the MBL and the rate of prosthetic complications. Most of these confounding factors were not considered in the included studies.
Based on the results from two clinical observational studies, no effect was found between the marginal bone level change and implant inclination, over a 5-year observation period., The type of implant and prothesis material which can possibly influence the rate of peri implant bone loss were different in these two studies. Overall, the studies included in this review focused on loading conditions without considering possible confounding factors that can contribute to an increased rate of peri-implant bone loss. Conflicting results were reported based on animal experiments. However, in the study reporting possible MBL in non-axial loading conditions, excessive forces were applied which are not comparable with normal functional loading conditions in humans. Evidence for the influence of prothesis misfit on different outcomes is based on different type of studies, in vitro, clinical and experimental animal studies. There is general agreement between studies that misfit between the implant abutment and the prothesis superstructure, does not influence marginal bone level changes and screw instability. However, the torqueing method (tightening and retightening) increased the removal torque and the stability of the abutment screw independent of the prothesis misfit level. For the other factors such as implant diameter, torqueing method, screw length and torque value, only one study per factor was included in this review so no definitive conclusions could be made on their influence of implant therapy outcome.
| Conclusions|| |
Within the limitations of this study, the following conclusions can be drawn;
The use of lubricated abutment screws can generate higher preload values
Internal conical implant/abutment interface performed better in strength tests under loading conditions.
The change in marginal bone level does not seem to be influenced by the presence of prothesis cantilever extensions. However. Minor technical complications were found when a cantilever was present.
The presence of prothesis misfit does not influence marginal bone level and connection screw stability.
Overall, non-axial loading conditions does not influence marginal bone level.
Ideally, a calibrated torqueing device should be used to obtain optimal torque values.
Financial support and sponsorship
This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Conflicts of interest
The author declare no conflicts of interest, financial or otherwise.
Ethical policy and institutional review board statement
The present research is a cross-sectional study proposed to the Institutional Review Board (IRB) of Prince Sattam bin Abdulaziz University, Saudi Arabia (PSAU2019707).
Patient declaration of consent
Data availability statement
The data used to support the findings of this study are included within the article.
| References|| |
Jemt T, Lindén B, Lekholm U. Failures and complications in 127 consecutively placed fixed partial prostheses supported by Brånemark implants: From prosthetic treatment to first annual checkup. Implant Dent. 1992;1:303. doi:10.1097/00008505-199200140-00014
Jung RE, Pjetursson BE, Glauser R, Zembic A, Zwahlen M, Lang NP. A systematic review of the 5-year survival and complication rates of implant-supported single crowns. Clin Oral Implants Res 2008;19:119-30.
Berglundh T, Persson L, Klinge B. A systematic review of the incidence of biological and technical complications in implant dentistry reported in prospective longitudinal studies of at least 5 years. J Clin Periodontol 2002;29(Suppl 3):197-212; discussion 232-3.
Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent 2003;90:121-32.
Salvi GE, Brägger U. Mechanical and technical risks in implant therapy. Int J Oral Maxillofac Implants 2009;24(Suppl):69-85. http://www.ncbi.nlm.nih.gov/pubmed/19885435. Accessed January 18, 2020.
Pjetursson BE, Tan K, Lang NP, Brägger U, Egger M, Zwahlen M. A systematic review of the survival and complication rates of fixed partial dentures (fpds) after an observation period of at least 5 years. Clin Oral Implants Res 2004;15:625-42.
Nedir R, Bischof M, Szmukler-Moncler S, Belser UC, Samson J. Prosthetic complications with dental implants: From an up-to-8-year experience in private practice. Int J Oral Maxillofac Implants 2006;21:919-28.
Moher D, Shamseer L, Clarke M, Ghersi D, Liberati A, Petticrew M, et al
. Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement. Syst Rev. 2015;4:1. doi: 10.1186/2046-4053-4-1.
Hooijmans CR, Rovers MM, de Vries RB, Leenaars M, Ritskes-Hoitinga M, Langendam MW. SYRCLE’S risk of bias tool for animal studies. BMC Med Res Methodol 2014;14:43.
Shea B, Robertson J, Peterson J, Welch V, Losos M. The Newcastle-Ottawa Scale (NOS) for assessing the quality of nonrandomized studies in meta- analysis bias and confounding Newcastle-Ottawa scale. http://www.evidencebasedpublichealth.de/download/Newcastle_Ottowa_Scale_Pope_Bruce.pdf. Published 2012. Accessed January 21, 2020.
Byrne D, Jacobs S, O’Connell B, Houston F, Claffey N. Preloads generated with repeated tightening in three types of screws used in dental implant assemblies. J Prosthodont 2006;15:164-71.
Stüker RA, Teixeira ER, Beck JC, da Costa NP. Preload and torque removal evaluation of three different abutment screws for single standing implant restorations. J Appl Oral Sci 2008;16:55-8.
Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-36.
Martin WC, Woody RD, Miller BH, Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32.
Cantwell A, Hobkirk JA. Preload loss in gold prosthesis-retaining screws as a function of time. Int J Oral Maxillofac Implants 2004;19:124-32.
Al Jabbari YS, Fournelle R, Ziebert G, Toth J, Iacopino AM. Mechanical behavior and failure analysis of prosthetic retaining screws after long-term use in vivo. Part 3: Preload and tensile fracture load testing. J Prosthodont 2008;17:192-200.
Winkler S, Ring K, Ring JD, Boberick KG. Implant screw mechanics and the settling effect: Overview. J Oral Implantol 2003;29(5):242-5.
Pardal-Pardal-Peláez B, Sanz-Alonso J, González-Serrano J, Montero-Martín J. Strategies to reduce torque loss of abutment screws. J Oral Res Rev 2018;10:68. doi:10.4103/jorr.jorr_37_17
Nithyapriya S, Ramesh AS, Kirubakaran A, Mani J, Raghunathan J. Systematic analysis of factors that cause loss of preload in dental implants. J Indian Prosthodont Soc 2018;18:189-95.
] [Full text]
Norton MR. In vitro evaluation of the strength of the conical implant-to-abutment joint in two commercially available implant systems. J Prosthet Dent 2000;83:567-71.
Khraisat A, Stegaroiu R, Nomura S, Miyakawa O. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent 2002;88:604-10.
Steinebrunner L, Wolfart S, Ludwig K, Kern M. Implant-abutment interface design affects fatigue and fracture strength of implants. Clin Oral Implants Res 2008;19:1276-84.
Cibirka RM, Nelson SK, Lang BR, Rueggeberg FA. Examination of the implant-abutment interface after fatigue testing. J Prosthet Dent 2001;85:268-75.
Maeda Y, Miura J, Taki I, Sogo M. Biomechanical analysis on platform switching: Is there any biomechanical rationale? Clin Oral Implants Res 2007;18:581-4.
Hansson S. Implant-abutment interface: Biomechanical study of flat top versus conical. Clin Implant Dent Relat Res 2000;2:33-41.
Kanawati A, Richards MW, Becker JJ, Monaco NE. Measurement of clinicians’ ability to hand torque dental implant components. J Oral Implantol 2009;35:185-8.
Goheen KL, Vermilyea SG, Vossoughi J, Agar JR. Torque generated by handheld screwdrivers and mechanical torquing devices for osseointegrated implants. Int J Oral Maxillofac Implants 1994;9:149-55.
Hälg GA, Schmid J, Hämmerle CH. Bone level changes at implants supporting crowns or fixed partial dentures with or without cantilevers. Clin Oral Implants Res 2008;19:983-90.
Romeo E, Lops D, Margutti E, Ghisolfi M, Chiapasco M, Vogel G. Implant-supported fixed cantilever prostheses in partially edentulous arches. A seven-year prospective study. Clin Oral Implants Res 2003;14:303-11.
Brosky ME, Korioth TW, Hodges J. The anterior cantilever in the implant-supported screw-retained mandibular prosthesis. J Prosthet Dent 2003;89:244-9.
Koutouzis T, Wennström JL. Bone level changes at axial- and non-axial-positioned implants supporting fixed partial dentures. A 5-year retrospective longitudinal study. Clin Oral Implants Res 2007;18:585-90.
Krekmanov L, Kahn M, Rangert B, Lindström H. Tilting of posterior mandibular and maxillary implants for improved prosthesis support. Int J Oral Maxillofac Implants 15:405-14. http://www.ncbi.nlm.nih.gov/pubmed/10874806. Accessed January 16, 2020.
Barbier L, Schepers E. Adaptive bone remodeling around oral implants under axial and nonaxial loading conditions in the dog mandible. Int J Oral Maxillofac Implants 1997;12:215-23.
Celletti R, Pameijer CH, Bracchetti G, Donath K, Persichetti G, Visani I. Histologic evaluation of osseointegrated implants restored in nonaxial functional occlusion with preangled abutments. Int J Periodontics Restorative Dent 1995;15:562-73.
Al-Turki LEE, Chai J, Lautenschlager EP, Hutten MC. Changes in prosthetic screw stability because of misfit of implant-supported prostheses. Int J Prosthodont 15:38-42. http://www.ncbi.nlm.nih.gov/pubmed/11887597. Accessed January 17, 2020.
Jemt T, Book K. Prosthesis misfit and marginal bone loss in edentulous implant patients. Int J Oral Maxillofac Implants 1996;11:620-5.
Jemt T, Lekholm U, Johansson CB. Bone response to implant-supported frameworks with differing degrees of misfit preload: In vivo study in rabbits. Clin Implant Dent Relat Res 2000;2:129-37.
Farina AP, Spazzin AO, Consani RL, Mesquita MF. Screw joint stability after the application of retorque in implant-supported dentures under simulated masticatory conditions. J Prosthet Dent 2014;111:499-504.
Boggan RS, Strong JT, Misch CE, Bidez MW. Influence of hex geometry and prosthetic table width on static and fatigue strength of dental implants. J Prosthet Dent 1999;82:436-40.
Yeo IS, Lee JH, Kang TJ, Kim SK, Heo SJ, Koak JY, et al
. The effect of abutment screw length on screw loosening in dental implants with external abutment connections after thermocycling. Int J Oral Maxillofac Implants 2014;29:59-62.
Xia D, Lin H, Yuan S, Bai W, Zheng G. Dynamic fatigue performance of implant-abutment assembles with different tightening torque values. Biomed Mater Eng2014;24(6): 2143-9.
Lee FK, Tan KB, Nicholls JI. Critical bending moment of four implant-abutment interface designs. Int J Oral Maxillofac Implants 2010;25:744-51.
Lang LA, Kang B, Wang RF, Lang BR. Finite element analysis to determine implant preload. J Prosthet Dent 2003;90:539-46.
Torrecillas-Martínez L, Monje A, Lin GH, Suarez F, Ortega-Oller I, Galindo-Moreno P, et al
. Effect of cantilevers for implant-supported prostheses on marginal bone loss and prosthetic complications: Systematic review and meta-analysis. Int J Oral Maxillofac Implants 2014;29:1315-21.
[Table 1], [Table 2], [Table 3], [Table 4], [Table 5], [Table 6], [Table 7]